@Config

This annotation is used to configure default values for configurable entity classes.

Options

defaultValues

Configures default values for particular config options on a per property basis:

// ...
use Oro\Bundle\EntityConfigBundle\Metadata\Annotation\Config;

/**
 * @Config(
 *      defaultValues={
 *          "dataaudit"={
 *              "auditable"=true
 *          }
 *      }
 * )
 */
class User
{
    // ...
}

This example sets the auditable option from the dataaudit scope to true for the User class.

You can use``immutable`` on any settings. This attribute can be used to prohibit changing the association state.

activity

This parameter sets default settings for OroActivityBundle. This bundle helps classify certain entity types as activities and enables a special relation type between an entity and activities. For more information, see OroActivityBundle.

  • show_on_page integer - is used to change a page, which will display the “activity list” and activity buttons. Can be used as bitmask. Possible values are in \Oro\Bundle\ActivityBundle\EntityConfig\ActivityScope::VIEW_PAGE.
  • route string - is the route name for the controller that can be used to render the list of this type of activities. This controller must have $entityClass and $entityId. Parameters to pass the target entity. This attribute must be defined for each activity entity (an entity included in the ‘activity’ group, see ‘grouping’ scope).
  • acl string - is used to check whether this type of activity is available in the current security context.
  • action_button_widget string - is the widget name of the activity action used to render a button. This widget should be defined in placeholders.yml. This attribute can be defined for the activity entity. Please note that an activity should provide both action_link_widget and action_link_widget, because actions can be rendered both as a button as a dropdown menu.
  • action_link_widget string - is the widget name of the activity action used to render a link in the dropdown menu. This widget should be defined in placeholders.yml. This attribute can be defined for the activity entity. Please note that an activity should provide both action_link_widget and action_link_widget, because actions can be rendered as a button as a dropdown menu.
  • activities string[] - is the list of activities’ class names that can be assigned to the entity.
  • inheritance_targets string[] - are target entity classes whose activities will be shown in the current entity. If entity 1 has relation with entity 2 and activity is enabled for both of them, we can configure entity 1 using this option to show activities from related entity 2. In the example of the configuration for unidirectional relations below, we are going to join the “user” relation to the “Test” entity through the “Example” entity relation:
[
   [target] => Oro\Bundle\ExampleBundle\Entity\Test
   [path] => [
       [0] => [
              [join] => Oro\Bundle\ExampleBundle\Entity\Example
              [conditionType] => WITH
              [field] => test_id
      ],
      [1] => user
   ]
]
  • priority integer - can be used to change the order of this type of activity on the UI.
  • immutable boolean or array - is used to prohibit changing the activity state (regardless of whether it is enabled or not) for the entity. If TRUE, then activity state cannot be changed. It can also be an array with the list of class names of activities whose state cannot be changed.

attachment

You can configure this attribute when you use AttachmentProvider.

  • enabled boolean - indicates whether attachments can be added to the entity or not.
  • maxsize integer - is the max size of the uploaded file in megabytes.
  • mimetypes string - is the list of all allowed MIME types for attachments. MIME types are delimited by linefeed (n) symbol. Example of values: ‘image/jpeg’, ‘image/gif’, ‘application/pdf’.
  • auto_link_attachments boolean - if TRUE, then Email Attachments are saved to the Attachment Entity.
  • immutable boolean - can be used to prohibit changing the attachment association state (regardless of whether it is enabled or not) for the entity. If TRUE than the current state cannot be changed.

attribute

Attributes enable you to create additional entity fields dynamically. Read more about this functionality in the Attributes Configuration topic.

  • has_attributes boolean - is used to enable the “attribute” functionality.

comment

  • enabled boolean - indicates whether the entity can have comments.
  • immutable boolean - is used to prohibit changing the comment association state (regardless of whether it is enabled or not) for the entity. If TRUE, then the current state cannot be changed.

customer

Provides customer configuration, such as registered customer classes, entity label, icon, route, etc.

  • enabled boolean - is used to enable the “customer” functionality.
  • associated_opportunity_block_priority integer - is the priority of associated opportunity grid block on the associated customer entity.

dataaudit

The parameter use OroDataAuditBundle to provide changelogs for your entities. Read more about Data Audit bundle.

  • auditable boolean - enables dataaudit for this entity. If it is not specified or set to false, you can enable audit in the UI.
  • immutable boolean - this attribute can be used to prohibit changing the auditable state (no matter whether it is enabled or not) for the entity. If TRUE than the current state cannot be changed.

dictionary

Dictionary entities are responsible for storing a predefined set of values of a certain type and their translations. They values within a dictionary can have a priority or some other data. More information is available in the Dictionaries topic.

  • virtual_fields string[] - specifies the list of fields for which the virtual fields can be created. If it is not specified, the virtual fields are created for all fields, except for the identifier ones.
  • search_fields string[] - specifies the list of fields used for searching in the reports filter.
  • representation_field string - specifies the representation field used to render titles for search items in the reports filter.
  • activity_support boolean - enables the “activity_support” functionality.

draft

OroDraftBundle enables you to edit and publish a version of the Draftable entity record that will need more work in order to be finished. For more information, see the How to Use Drafts topic.

  • draftable boolean - enables the “draft” functionality.

entity

This attribute configures UI params of the entity.

  • icon string - sets the icon in the admin area. For more information, see Font Awesome documentation .
  • entity_alias string - stores an alias generated for an entity and helps to resolve duplicate aliases.
  • entity_plural_alias string - stores a plural alias generated for an entity and helps to resolve duplicate aliases.
  • contact_information array - enables you to change contact information (phone or email) for the entity.
  • label string - changes label of the entity.
  • plural_label string - changes plural label of the entity.
  • description string - changes description of the entity.
  • grid_all_view_label string - changes all view label of the entity.
  • frontend_grid_all_view_label string - changes all view label of the entity for frontend.

enum

This attribute is only used for Enum parameters. For more information, see Option Set Fields .

  • code string - a unique identifier of this enum.

  • public boolean - indicates whether this enum is public. Public enums can be used in any extendable entity, which means that you can create a field of this enum type in any entity. Private enums cannot be reused.

  • multiple boolean - Indicates whether several options can be selected for this enum or it supports only one selected option.

  • immutable boolean or array - is used to prohibit changing the list of enum values and a public flag. This means that values cannot be added or deleted, but it is still possible to update the names of existing values, reorder them and change the default values. Below are examples of possible values:

    • false or empty array - no any restrictions
    • true - means that all constraints are applied, so it will not be allowed to add/delete options and change ‘public’ flag
    • ‘add’, ‘delete’, ‘public’ - the same as true; it will not be allowed to add/delete options and change ‘public’ flag
    • ‘delete’ - it is not allowed to delete options, but new options can be added and ‘public’ can be changed

  • immutable_codes string[] - is an array of undeletable enum options. These options cannot be deleted but can still be edited.

extend

This attribute sets default settings for Extend Entities.

  • owner string - can have the following values:

    • ExtendScope::OWNER_CUSTOM - The property is user-defined, and the core system should handle how the property appears in grids, forms, etc. (if not configured otherwise).
    • ExtendScope::OWNER_SYSTEM - Nothing is rendered automatically, and you must explicitly specify how to show the property in different parts of the system (grids, forms, views, etc.).

  • table string - is the table name for a custom entity. This is optional attribute. If it is not specified, the table name is generated automatically.

  • inherit string - is the parent class name. You are not usually requires to specify this attribute as it is calculated automatically for regular extend and custom entities. An example of an entity where this attribute is used is EnumValue.

  • pending_changes - when a user changes something that requires schema update, this change is not applied to the configuration, but is stored into “pending_changes” as changeset. The format of changeset is [‘scope’ => [‘field’ => [‘oldValue’, ‘newValue’], …], …].

    Let’s assume that a user has an active activity email and changes it to a task. In this case, the value of pending changes would be the following:

    'activity' => [
    'activities' => [
        ['Oro\Bundle\EmailBundle\Entity\Email'],
        ['Oro\Bundle\TaskBundle\Entity\Task'],
    ],
]

  • is_serialized boolean - if TRUE then field data will be saved in serialized_data column without doctrine schema update.

  • state string - the state of the extend config field. See available states in ExtendScope.php.

  • is_extend boolean - if true, the config entity is able to extend.

  • is_deleted boolean - if true, the config entity is able to delete.

  • upgradeable boolean - if true, the extend config entity is able to update.

  • pk_columns string[] - a list of Primary Keys column name.

  • index string[] - a list of index fields of the entity. See available index states in IndexScope.php

  • schema array - contains information about the structure and entity class of the extend.

  • relation array - contains information about the relation of the entity.

  • extend_class string - extends class name.

form

This attribute configures Custom Form Type for Fields .

  • form_type string - form type for a specific entity.
  • form_options array - form options for a specific entity.
  • grid_name string - name of grid of the entity. Examples: ‘users-select-grid’, ‘contacts-select-grid’, ‘customer-customers-select-grid’.

grid

With this parameter, you can set the Datagrid.

  • context string - a grid name that used for rendering entity context.
  • default string - the default grid name for the entity.

grouping

  • groups string[] - allows to group entities. An entity can be included in several groups.

merge

The attribute enables you to merge the scope of an entity.

  • enable boolean - enables merge for this entity.
  • cast_method string - options for rendering entity as string in the UI. Method of entity to cast object to string. If these options are empty __toString will be used (if available).
  • template string - a twig template to render object as string.
  • max_entities_count integer - the max count of entities to merge.

organization

  • applicable array - is used to specify which organizations custom entity will be visible to. On the entity edit page, it is represented with form type oro_type_choice_organization_type, which provides a selector for organizations (regardless of whether it is activated or not) defined in the application so that user can select a specific organization(s) or “ALL” organizations.

Example:

'all' => true
'selective' => []

ownership

The attribute set owner of the entity. For more information, see Access Levels and Ownership and Configuring Permissions for Entities.

  • owner_type string - can have the following status:

    • ORGANIZATION needs to set owner_field_name and owner_column_name
    • BUSINESS_UNIT needs to set owner_field_name, owner_column_name, organization_field_name and organization_column_name
    • USER needs to set owner_field_name, owner_column_name, organization_field_name and organization_column_name

  • frontend_owner_type string - can have the following status:

    • FRONTEND_USER
    • FRONTEND_CUSTOMER

  • owner_field_name string - the name of the owner field; if owner_type is ORGANIZATION, then this parameter equals organization_field_name.

  • owner_column_name string - the name of the owner column; if owner_type is ORGANIZATION, then this parameter equals organization_column_name.

  • organization_field_name string - the name of the organization field; if owner_type is ORGANIZATION, then this parameter equals owner_field_name.

  • organization_column_name string - the name of the organization column; if owner_type is ORGANIZATION, then this parameter equals owner_column_name.

Attributes for frontend owners: frontend_owner_field_name, frontend_owner_column_name, frontend_customer_field_name, frontend_customer_column_name.

  • global_view boolean - allows to show entities from an organization with system access to another organization.

reminder

A notification about the upcoming event.

  • reminder_template_name string - reminder email template name
  • reminder_flash_template_identifier string - reminder WebSocket message template name

security

For more information, see the Configuring Permissions for Entities topic.

  • type string - is a type of security. In most cases “ACL”.
  • permissions string - is used to specify the access list for the entity. Example: VIEW;CREATE;EDIT;DELETE.
  • group_name string - is used to group entities by applications.
  • category string - is used to categorize an entity.
  • field_acl_supported boolean - enable this attribute to prepare the system to check access to the entity fields. For more information, see Enable Support of Field ACL for an Entity.
  • share_scopes string[] - determines within which group an object can be shared (available for the Enterprise edition only). For example, if share_scope=[organization], then a user can share the object only to organizations. Role permission “Share” says who can share, “Share Scope” says how an object can be shared.

Other possible attributes for security: group, share_grid, field_acl_enabled, show_restricted_fields.

sharding

Data sharding allows to improve OroCommerce operation and accelerate database performance when handling big volumes of data. For more information, see Configure Price List Sharding.

  • discrimination_field string - is the name of the sharding field. Example: “priceList”.

slug

This attribute is set for SluggableInterface.

  • source string - slug source field name.

tag

This attribute is set up for the tag entity.

  • enabled boolean - indicates whether the entity can have tags. By default false.
  • immutable boolean - can be used to prohibit changing the tag state (regardless of whether it is enabled or not). If TRUE, then the current state cannot be changed. By default false.
  • enableGridColumn boolean - indicates whether column with tags should appear by default on the grid. If FALSE, it does not appear on the grid, and can be enabled from the grid settings. By default true.
  • enableGridFilter boolean - indicates whether tags filter should appear by default on the grid. If FALSE, it does not appear on the grid, and can be enabled from the filter manager. By default true.
  • enableDefaultRendering boolean - indicates whether to use default rendering of tags in entity view pages. If FALSE tags will not be rendered automatically and allows to use custom rendering logic. By default true.

territory

  • associations string[] - an array of territory association classes.

workflow

  • show_step_in_grid boolean - if TRUE, then a workflow step is displayed in the grid.

routeName

The route name of the view that shows the datagrid of available records:

// ...
use Oro\Bundle\EntityConfigBundle\Metadata\Annotation\Config;

/**
 * @Config(
 *      routeName="oro_user_index"
 * )
 */
class User
{
    // ...
}

routeView

The route name of a controller that shows a particular object:

// ...
use Oro\Bundle\EntityConfigBundle\Metadata\Annotation\Config;

/**
 * @Config(
 *      routeView="oro_user_view"
 * )
 */
class User
{
    // ...
}

routeCreate

The route name of a controller that creates an object:

// ...
use Oro\Bundle\EntityConfigBundle\Metadata\Annotation\Config;

/**
 * @Config(
 *      routeCreate="oro_user_create"
 * )
 */
class User
{
    // ...
}

routeUpdate

The route name of controller action that updates an object:

// ...
use Oro\Bundle\EntityConfigBundle\Metadata\Annotation\Config;

/**
 * @Config(
 *      routeUpdate="oro_user_update"
 * )
 */
class User
{
    // ...
}